FLIR MR176

Imaging Moisture Meter

Premium moisture solution with all the benefits of a 3-in-one moisture meter plus Infrared Guided Measurement (IGM) for more flexibility, convenience & faster troubleshooting

FLIR MR176 Imaging Moisture Meter Specifications

FLIR FLIR MR05 - IMPACT PIN MOISTURE PROBE

The FLIR MR05 upgrades your FLIR moisture meter to help you easily test for moisture in challenging spots - on rough or uneven surfaces, in corners, in hard woods or high-density materials, and even in areas without a dry reference. Made with extra-durable pins and a metallic impact plate that can withstand hammering to drive pins into the hardest materials, the FLIR MR05 lets you tackle the toughest moisture measurement challenges.

• Six additional sets of thick and thin pins
• An external pin accessory for extended reach
• 1/4"-20 integrated wrench on the cap to replace pins
• Durable BNC connector
• 2.45m (8') coiled cord
• 2 year warranty

The MR06 Wall Cavity Probe expands the functionality of your FLIR Moisture Meter by allowing you to easily measure insulation moisture levels within the wall cavity and the inside face of exterior walls.

• Insulated pins designed for increased durability
• Rubberized ergonomic grips reduce slippage 
• Detachable cord with durable BNC connection
• 4" and 6" pins included
• Impact plate to drive pins through drywall

Compatible with FLIR MR77, FLIR MR160, and FLIR MR176.

FLIR FLIR MR12 MR12 Ball probe moisture sensor

MR12 Ball probe
moisture sensor
accessory
Take non-invasive
readings up to 100 mm
(4 in) below a surface.

For FLIR MR176, MR160, MR60 and MR277

FLIR FLIR MR01 Replaceable Temperature, Relative Humidity Probe

The MR01 is a field replaceable temperature and relative humidity sensor designed specifically for use with select FLIR moisture meters. The sensor can be exchanged when needed to reduce downtime.

Easy to use, point-and-shoot thermal imaging cameras

The FLIR TG130 Spot Thermal Camera bridge the gap between single spot infrared thermometers and FLIR’s thermal cameras. Equipped with FLIR’s exclusive Lepton® micro thermal sensor, the TG165 / TG167 let you see the heat so you know where to reliably measure it. The TG130 is useful for building applications, like HVAC inspections, or locating a warm pipe in a wall. The wider field of view (50° horizontal) makes it easy to frame an entire wall in a single image.

FLIR DM166 Infrared-Multimeter with IGM™
 

Flir DM166 | Multimeter, Hand Set 4, TRMS with thermal imaging camera 80x60px, -10 ° C to 150 ° C, IP40.

The DM166 is the cheapest multimeter with integrated thermal imaging camera and an indispensable tool for electricians, automation engineer, electronic and HVAC technician. With its infrared controlled measurement guide technology IGM ™ (Infrared Guided Measurement) and the integrated FLIR thermal imaging sensor with a resolution of 80 × 60 pixels leads the DM166 visually the exact position of temperature anomalies and potential problems - faster, safer and more efficient. The high-function multimeter is an ideal tool for the analysis and correction of complex disorders in high- and low-voltage applications.

Features and highlights:

• Digital multimeter with VFD low pass filter mode, TRMS True RMS and non-contact voltage testing (NCV)
• (Ext over. Thermocouple) voltage AC / DC to 600 V, AC / DC current to 10 A, LoZ, resistance to 60 milliohms, passage capacity to 10,000 microfarads, diode, temperature -40 ° C to 400 ° C
• 76 mm TFT with 6000 count
• Thermal imager with 4800 pixels (80 x 60px)
• Thermal sensitivity: ≤ 0.15 ° C (150 mK)
• Emissivity: 4 Preset steps, individually adjustable
• Measurement accuracy: 3 ° C or 3.5%
• Range: -10 ° C to 150 ° C
• Field of view: (B x H) x 50 ° 385 °
• Fix focus
• laser pointer
• Color palettes: iron, rainbow, grayscale
• Level / span Automatically
• Simultaneous display of thermal imaging and thermocouple readings
• Thermocouple input with thermocouple probe (Type K) with a temperature range from -40 ° C to 1,200 ° C
• Drop resistance test: 3 m
• Integrated LED work lights
• Display Size: 2.8 inches
• Automatic shutdown
• Safety CAT III 1.000 V, CAT IV 600 V
• Dimensions W x 86.4 H x 190 T 48.3 mm, weight: 428 g
• Warranty 10 years
• Scope of supply: DM166, lithium batteries, silicone test leads, soft carrying case

FLIR IM75 Insulation & DMM Combo with METERLiNK®
The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment.

KEY FEATURES
• Advanced Insulation Modes: Insulation Resistance up to 20 GΩ, PI, DAR, Earth Bond Resistance
• Multiple ranges of resistance insulation test levels available via rotary switch: 50V, 100V, 250V, 500V, 1000V
• Multi-color LED indicator with Compare Mode makes pass/fail determinations easy and visible
• True RMS DMM measurements features reliable performance and 1000V range
• VFD Mode for superior accuracy on variable controlled drive equipment
• Remote viewing of real time readings on AndroidTM and iOSTM smartphones and tablets with METERLiNK® connectivity and free FLIR Tools Mobile app
• Transmit readings to METERLiNK-enabled FLIR thermal imaging cameras to document and analyze thermal changes during insulation measurements
• Extremely bright LED worklights in a flood pattern to illuminate test areas and targets
• Durable double-molded construction (IP54, 2m Drop Test)
• Ready for work with plenty of accessories: silicone CAT IV test leads with screw on silicone insulated alligator clips, and magnetic hanging strap

FLIR TG275 thermal imaging camera 160x120px 50° + -25 °C bis 550 °C

NEW - with the revolutionary MSX function

FLIR MR55 - A precise and reliable meter with wireless connectivity